Finishing-Dyeing

Ref 174
No. 1 shearing machine TORRES mod TAR-200, width 3400 mm, year 2001, equipped with metal detector.

Ref 093
No. 1  HT horizontal autoclave dyeing machine NOSEDA TSDA 1050/4000 for fabrics, width 4.000 mm, capacity 400 Kg., year 2000.
- high pressure horizontal autoclave with upper air cushion chamber.
- alternating current engine with frequency variator.
- circulation pump.
- valves
- two complete sets of beams with its carriers. At the moment the machine is equipped with double beams and includes a tank to reduce the bath in case or working with a single beam. It can also be eventually equipped with one full wide beam.
- electric pannel with EAS Escarré programmer.
No. 1  HT horizontal autoclave dyeing machine NOSEDA TSDA 900/4000 for fabrics, width 4.000 mm, capacity 200 Kg (2 units), year 2000.
- high pressure horizontal autoclave with upper air cushion chamber.
- alternating current engine with frequency variator.
- circulation pump.
- valves
- two complete sets of beams with its carriers. At the moment the machine is equipped with double beams and includes a tank to reduce the bath in case or working with a single beam. It can also be eventually equipped with one full wide beam.
- electric pannel with EAS Escarré programmer.
No. 1 CTEX HT JET ECO RAPIT HT 2, 2 ropes, capacity 300 Kg., year 2000.
- winch powered by AC engine inverter drived.
- circulation pump.
- heat exchanger, filter.
- adding tank.
- pneumatic valves.
- electric pannel with a  CODEPRO programer
No. 1 CTEX HT JET ECO LAB 25, capacity 20 Kg., year 2000.
- winch powered by AC engine inverter drived.
- circulation pump.
- heat exchanger, filter.
- adding tank.
- pneumatic valves.
- electric pannel with a  CODEPRO programer
No. 1 CTEX HT JET ECO LAB 5, capacity 5 Kg., year 2000.
- winch powered by AC engine inverter drived.
- circulation pump.
- heat exchanger, filter.
- adding tank.
- pneumatic valves.
- electric pannel with a  CODEPRO programer
No. 1 Openning-Slitting machine BIANCO, width 2.200 mm, year 2000.
- inlet with rotatory platform
- automatic detwister
- automatic Air Slit slitting device
- 2 driven opening cylinders and Dogal centering device and outlet to plaiter.
- machine made in stainlkess steel and adjustable height

Ref 077
No. 1 Overflow machines ATYC BT-DUPLEX-4, year 1987, steam heating, capacity 400 Kg (2x200 Kg)
No. 1 Overflow machines ATYC BT-DUPLEX-4F, year 1988, steam heating, capacity 400 Kg
No. 3 automatic kitchen ATYC for mixing products, year 1996.
No. 1 Rope openning and detwisting machine TAPALSA, year 1987.

Ref 078
INDIGO &  WARP DYEING
N. 1 Direct warping machine made by HACOBA model BMS-1250-E can warp different widths of warp beams between 1400mm and 2100 mm flanges up to 1400 mm diam. (1988)
N. 1 Direct warping machine made by HACOBA model BMS-1400-E can warp different widths of warp beams between 1400mm and 2100 mm flanges up to 1400 mm diam. (1988)  (1991)
N. 3 Creels made by HACOBA, H type with 450 ends each, pitch 330 mm
N.1 Instalation for dyeing made by SUCKER model WN/TZ/LC with creel for 12 primary beams for 1600 mm width, 8 indigo boxes + 2 washing boxes and 1 aditive or aditional washing box,  1 Hydraulic acumulator for oxidation at the exit of each box, 2 Syncro dryers at the exit of last box, Sizing machine made by SUCKER double deep sizing box, exit on 2 syncros TZ type, (4x2 drums), 2 acumulators SUCKER MULLER, take up WN model of 3200 mm width for flanges up to 1000 mm diam. (1987)
N.1 Instalation for dyeing made by SUCKER model WN/ZGV/SD with creel for 12 primary beams for 1600 mm width, 8 indigo boxes + 2 washing boxes and 1 aditive or aditional washing box,  1 Mechanical acumulator for oxidation at the exit of each box, 2 Syncro dryers at the exit of last box, Sizing machine made by SUCKER double deep sizing box, exit on 2 syncros TZ type, (4x2 drums), 2 acumulators SUCKER MULLER, take up WN model of 3200 mm width for flanges up to 1000 mm diam.  (1980)

Ref 079
SANFORIZING LINE FOR DENIM MORRISON/FITE/TESTA 1980/2001

N. 1 Sanforizing range made by MORRISON model 80/140 with J Box acumulator for feeding, singeing machine made by FITE, weft straightener made by MAHLO, and 2 x 9 dryer drums towers, and exit with automatic TESTA machine on jumbo rolls (1980/2001).
FINISHING FOR DENIM WITH  (NH4 OH) system MONFORTS/LEWIS 1980

N. 1 Instalation for treatment with (NH4 OH) Amonium hydroxide, made by MONFORTS model NH3-200 (1980)
N. 1 Instalation for recuperation of (NH4 OH) Amonium hydroxide, made by LEWIS CIMCO with 2 compressors of 500 HP each (1980)
N. 1 Brushing machine made by MONFORTS, with J-Box acumulator (1980)