Weaving preparation
WARPING MACHINES
Ref wp-032/2
No. 1 sectional warper KARL MAYER BOM 3200, width 3200 mm, year 2002
- Rotatory air creel type GD-M 384 (192x2=384 bobbins) + 384 on reserve
- Gauge 270 mm
- Angle cone: 12º
- Lenght cone: 1200 mm
- Diameter beamer: 1000 mm
- Diam. warp beam flange: 1000 mm
- Readingin unit
- Waxing device- Press bars rollers
- Stop device by remote control from any place
- Suitable for cotton and reinforced for synthetic yarns
Ref 097
No. 1 sectional warper BENNINGER BENTRONIC, width 3400 mm, year 1999, diam. warp beam 1000 mm, lenght cone 1600 mm, angle cone 7.5º, waxing device, equipped with rotatory creel GM-D/BEN-TENS-560, 576 bobbins (288+288) + 576 reserve, gauge 270 mm., crossing device BEN-SPLITTRONIC-1000, electronic stop yarn device BEN-GARD.
Ref 169
No. 1 sectional warper BENNINGER SUPERTRONIC, width 3400 mm, year 1992, beam diam. 1000 mm, cross device Ben-Split, with creel GAAB/GZB-S of 640 bobbins and 640 on reserve with trolleys, electronic stop yarns GFAM-640, gauge 270 mm., waxing box, pressure yarn bars.
Ref 170
No. 1 sectional warper COMSA TECNOR 8, width 3400 mm, year 1997, flange beam diam. 800 mm, with double creel Benninger 640 bobbins + 640 bobbins, gauge 250 mm, waxing box.
Ref 046
No. 1 sectional warper COMSA TECNOR 10, width 3600 mm, year 1997, diam flange 1000 mm, with 2 creels: ROF (600 bobbins, year 1970, gauge 270, cross gauge 300 mm, electrical shotting, 8 levels) and BENNINGER (640 bobbins, year 1984, gauge 270 mm, cross gauge 390 mm, electrical shotting, 8 levels), waxing box.
Ref 047
No. 1 sectional warper COMSA TECNOR 10, width 3600 mm, year 1997, diam flange 1000 mm, with 1 creel
Ref 070/1
No. 1 sectional warper COMSA EXPO 800, width 2500 mm, year 1990, waxing and sizing unit, warp beams flange diam 800 mm, suitable for cotton and poliester yarns, equipped with creel 392 bobbins, gauge 280 mm.
Ref 121
No. 1 sectional warper COMSA EXPO 800, width 3400 mm, year 1986, warp beam diam flange 800 mm, waxing device, equipped with air creel 1,152 bobbins (576x2), gauge 260 mm.
SIZING MACHINES
Ref 168
No. 1 sizing machine BENNINGER, year 1997, width 4000 mm, flange beam diam. 1200 mm, one sizing box with double squezzing, 8 drums dryer 4 teflonized and 4 metallic, panel control Benninger BEN-SIZETEC, kitchen Benninger and creel with 16 beams flange diam. 1000 mm. (320 beams as accessories)
No. 1 direct warper BENNINGER BEN-DIRECT, year 1997, working width 2000 mm, flange beams diam. 1000 mm, V creel Benninger Ben-Stop with 640 bobbins and 640 on reserve, gauge 350 mm.
KNOTTING MACHINES
Ref 149
No. 1 knotting machine Fischer PU/ELA (serial number 26021188) with tying frame 3400 mm.
Ref 150
No. 1 knotting machine Staubli TPM 301, year 2005 with tying frame 1900-2000 mm. (used just 1 time).
Ref 151
No. 1 knotting machine USTER TOPMATIC-PC (serial number 3302/3) with 2x tying frame 2000 mm or 1x 4000 mm.
Ref 167
No. 1 Automatic drawing-in machine ELM VEGA, width 3600 mm., year 1996, capacity 18 heald frames, 2 trolleys for heald frames, with ultrasound cleaning droppers machine STIMIN.
